See more repair projects in my blog
Fortunately the break is almost always repairable. I make accurately shaped cauls in order to clamp the pieces together and even with clear finishes the repair is often only detectable on close inspection.
The guitar shown in the large picture above is a Gibson Les Paul GT that belonged to Curtis from BMTH. You might be able to make out the join line!
If the frets of your guitar are so worn that fret dressing is no longer an option, then you must consider a refret. I have refretted many guitars over the years (I still remember my first – a Vox Lynx in about 1975) including of course those with bound fretboards. I continue to be surprised by the number of people who believe that neck binding must be removed before replacing the frets on a bound neck. This is simply not the case and I have the tools and techniques available to leave your binding in place!
Please be aware that refretting a maple neck is unfortunately more expensive than rosewood due to the necessity of relacquering the fretboard.
Sometimes a whole refret is not necessary and the troublesome frets can be repaired or replaced in a partial refret.
Again, some players think that their guitars need a full or partial refret when a fret dress is all that is required. Be assured that I will give the best advice.
If your guitar nut is worn, and open strings are buzzing then it’s time for a new nut. I can fit nuts made from a variety of materials depending upon the type of guitar and the style of music that you play. I would recommend a bone or Tusq nut for most non-tremolo guitars.
Headstock breaks cost between £75 and £200 to repair. The majority of this cost is for refinishing the lacquer around the break in order to make good the guitar’s finish.
A new nut, fitted to your guitar and perfectly cut will cost around £30 in Tusq or £40 in bone. Brass is a little extra!
A full refret starts at £200 for an unbound rosewood fretboard to £250 for the trickier jobs. This price includes a nut and setup.